"The on-line help was very good"
Light Globe
Location Ref: Pg:2 Item:001
Exploded diagrams, Schematics and other documents
Installation
Angela
VIC
"Na"
Shane
VIC
"Pretty easy swap"
Stephen
NSW
"Remove the screws 4 on the lower side and 5 on the rear securing the outer casing of the oven. remove casing. facing the front the bulb is on the right hand side. remove the wired plug to the bulb. bulb is held in place by two plastic posts. posts have like a cut in them. you need to lightly squeeze each post to release the bulb backplate over the posts. do one at a time and just lift them enough so the post does not hold the bulb plate in any more. slide the plate (with attached bulb) over the posts and the bulb will come out of its housing. insert the new bulb the posts will automatically hold it in, replace wired power plug. return cover to position and insert screws. you can find videos of how to do this on youtube"
Jan
VIC
"Disconnect the microwave oven from the power, unscrew screws of outer cover. slide off the cover. use pliers to remove old globe. remove wires. replace globe and reverse the process."
Ewan
NSW
"Remove screws around outer cover"